The Rane Sixty-Two Performance Mixer with Serato Scratch Live Software features a pair of USB 2.0 ports for seamless integration with Serato Scratch Live DJ Software and easy change-overs between Serato DJs without disrupting sets. The Sixty-Two delivers an extensive set of features over the streamlined Rane Sixty-One. Its twin USB 2.0 interface delivers 24-Bit 48kHz audio resolution, its onboard effects engine features Filter, Flanger, Phaser, Echo, Robot and Reverb effects, and a full set of controls allow for SP-6 sample triggering, looping, cue point control and more.
The Sixty-Two's USB 2.0 port is capable of handling up to 6 record channels, and 4 playback channels. Easily record your sets into Serato while triggering post-fader effects, microphone input signals and samples via Serato's SP-6 sample player. The Sixty-Two also features FlexFX loop I/O via analog 1/4" connectors for routing hardware effects. Easily run your external hardware effects alongside software or internal effects.
Its straightforward design features flexible routing with line and turntable switchable inputs, balanced XLR main outputs, balanced booth outputs, microphone and line combo-input, and unbalanced I/O with RCA connections. The headphone monitoring output features both 1/8" (3.5mm) mini and 1/4" phone connections. Each channel features a dedicated 3-band EQ section and filter with adjustable resonance. The Sixty-Two features the same magnetic crossfader and level faders featured on the Rane TTM57SL.
FEATURES:
- Bundled with Serato Scratch Live along with ASIO and Core Audio drivers
- Control Library, Cues, Loops and Samples on two computers with more than 40 software controls
- Each USB Port supports six stereo record and four playback channels
- 32-Bit floating point audio processing sampled at 48kHz
- Mic / line switchable input on XLR/TRS jack with gain trim, two-band EQ,and FlexFx assign and On/Over controls
- External analog insert for analog effects processor
- USB Aux input for SP-6 sample playback with headphone cue and FlexFX assign
- Magnetic crossfader and channel faders with reverse and contour controls
PGM Controls Include
- Gain trim, 3-band full-cut EQ, Left/Right Pan, HP/LP filter with adjustable resonance
- FlexFx assign, headphone cue assign, Q-peak meter
- Magnetic fader with contour and reverse controls
Internal Effects Engine with Filter, Flanger, Phaser, Echo, Robot and Reverb
- MIDI beat clock tracking and generation
- BPM sync with Scratch Live
- TAP engine with time encoder and beat multiplier control
Minimum System Requirements | • Available USB 2.0 port • 1024 x 768 screen resolution or higher • 2 GB RAM, more for a large library • Hard drive space for music: 5400RPM minimum, 7200RPM recommended for high resolution audio playback PC • 2.2 GHz Intel Core Duo • Windows XP with Service Pack 3 or higher, or Vista with Service Pack 2 or higher, or Windows 7 (Windows 7 over Vista recommended) Mac • 1.83 GHz Intel Core Duo • OSX 10.5.8 or higher |
Analog Inputs | 4 Stereo unbalanced RCA jacks Phono or Line level input: Rear panel switches for each input Phono Response: RIAA ±1dB, Gain: 30dB at 1kHz Max Phono Input: 150mV Max Line Input: 4 Vrms |
ADC | 24-bit, 48kHz; dynamic range 101dB A-weighted |
DAC | 24-bit, 48kHz; dynamic range 107dB A-weighted |
DSP | 48kHz, 32-bit floating point |
USB 2.0 | Six stereo record, four stereo playback 48kHz, 32-bit floating point |
Sends/Returns | FlexFX Return: Stereo unbalanced 1/4" TS (tip-sleeve) phone jack Send: Stereo unbalanced 1/4" TS phone jack |
Mic Input | Balanced 1/4" TRS & XLR combination jack Tone Controls: 2-band, High and Low Mic-Line level switch: Choose Line to connect wireless receiver |
Frequency Response | 20Hz to 20kHz ±0.25dB, Line in to Line out |
THD & Noise | ‹ 0.01 re 0dBFS, 20 to 20kHz, 20kHz BW Unbalanced jacks (RCA & FlexFX): Maximum 4 Vrms Balanced jacks (Main 1/4"): Maximum 8 Vrms |
Power Supply | 100 to 240VAC, 50Hz to 60Hz, 15W max |
Dimensions | 14.25 x 10.5 x 4" (36.2 x 26.7 x 10.2cm) |
Weight | 10lb (4.3kg) |
Packaging Info | |
---|---|
Package Weight | 13.45 lb |
Box Dimensions (LxWxH) | 19.5 x 15.5 x 7.9" |
- Rane Sixty-Two Performance Mixer with Serato Scratch Live Software
- Scratch Live Software Install Disc
- 2 x Control CDs
- 2 x Control Vinyl Records
- 2 x USB Cables
- Power Cable
- Quick Start Guide
- Owners Manual
Included Free
- Odyssey Innovative Designs - FR10MIXE Econo Universal Flight Ready DJ Mixer Case